Included software:

Install and Explore

Protocol and API Software Libraries v3.52:

  • Portable Controller API
  • Bridge Controller API (without SUC, repeater & FLiRS support)
  • Installer Controller API
  • Static Controller API (without repeater, FLiRS & manual routing support)
  • Static Controller API (without repeater & FLiRS support)
  • Static Controller API (without SUC & FLiRS support)
  • Static Controller API (without SUC & repeater support)
  • Routing Slave API
  • Routing Slave API (without FLiRS & manual routing support)
  • Routing Slave API (without return route update support)
  • Enhanced Slave API
  • Enhanced Slave API (without FLiRS & manual routing support)
  • Enhanced Slave API (without return route update support)
  • Enhanced 232 Slave API
  • Enhanced 232 Slave API (without FLiRS & manual routing support)
  • Enhanced 232 Slave API (without return route update support)
  • Slave Production Test Generator API
  • Slave Production Test DUT API

Sample code for ZW0201/ZW0301 embedded applications:

  • Binary Sensor (non-secure/secure) v3.64
  • Battery operated Binary Sensor (non-secure/secure) v3.64
  • Development Controller v3.62
  • Secure Development Controller (AVR) v1.30 using serial API portable controller v3.77
  • Door Lock (non-secure/secure) v1.57
  • Door Bell v1.79
  • LED Dimmer (non-secure/secure) v3.64
  • My Product v1.68
  • Production Test DUT v1.62
  • Production Test Generator v1.82
  • Serial API v3.77
  • Utility Functions v1.83

Sample code for PC applications:

  • PC Controller v4.59 using serial API static controller v3.77
  • Z-Wave to UPnP Bridge v3.30 using serial API bridge controller v3.77
  • PC Installer Tool v2.30 using serial API installer controller v3.77
  • Z-Wave DLL v4.49
  • Z-Wave HAL v4.46
  • Z-Wave Security HAL v4.46
  • Z-Wave Command Classes v1.16
  • WinFormsUI v1.00
  • ZensysFramework v1.05
  • ZensysFrameworkUI v1.14
  • ZensysFrameworkUIControls v1.07

Developer Tools:

  • Z-Wave Zniffer v4.35 using 400 Series Zniffer firmware v2.33 (2-channel and 922MHz 3-channel) and 200/300 Series firmware v2.29
  • Z-Wave Zniffer File Converter v1.05
  • Z-Wave XML Editor v1.10
  • ZW0102/ZW0201/ZW0301 PVT and RF regulatory measurements firmware v1.35
  • Z-Wave Programmer v2.45 using ATMega128 firmware v1.16
  • SD3402 Crystal Calibration firmware v1.19
  • Enhanced Reliability Test Tool v1.06 (ZW0201/ZW0301 Serial API v2.52 without ACK)

Click on the icon below to install the SW directory content to your local PC:


Explore the software directories here